FileTex Plaster and Reinforcement Meshes

FileTex Plaster and Reinforcement Meshes fully meet the technical characteristics required to be used in the thermal and water insulation applications on the interior and exterior wall elements.

• Special products suitable for the application area
• Rolls in any desired length and width
• Information support and share of experience
• Mesh production in any desired color
• Delivery from stocks and quick service
• Mesh production marked with the customer brand and logo
• Sustainability of the technical specifications and quality of the product based on the tests performed at Istanbul Technical Laboratory.

Mesh Ranges

FileTex 160 Premium Plaster Mesh

This is an E-Glass reinforcement mesh recommended for thermal insulation (sheathing) and indoor and outdoor plaster applications. FileTex 160 Premium Plaster Mesh has mesh size of 4 x 4 mm and unit weight of minimum 160 g/sqm, and has high and real alkali resistance.

FileTex 110 Premium Plaster Mesh

These are highly alkali resistant E-Glass meshes which are used as reinforcement in the rough plaster ceiling application on interior and exterior walls of the buildings and have 10 x 10 mesh sizes. In particular, by detaching the gas concrete brick walls from the beam column joints, local cracking occurs in plaster. Placing the FileTex 110 Premium Plaster Meshes, whether in rolls or in slices of 30 cm, into brick-concrete joints as reinforcement in the plaster will prevent the formation of cracks in the wall. FileTex 110 Premium Plaster Mesh has mesh size of 10 x 10 mm and unit weight of 110 g/sqm, and has high and real alkali resistance.

FileTex 75 Standard Reinforcement Mesh

These are C-Glass meshes which are used as reinforcement mesh in the thermal insulation and waterproofing made with gypsum plaster on interior walls. FileTex 75 Standard Reinforcement Mesh has mesh size of 4 x 4 mm and unit weight of minimum 75 g/sqm, and has high and real alkali resistance.

FileTex 60 Standard Reinforcement Mesh

FileTex 60 Standard Reinforcement Meshes are E-Glass meshes which are recommended as reinforcement mesh in sliding-based waterproofing applications. These are suitable for use with all types of waterproofing material. In particular, when it is required to form a thin layer with cement-based, sliding-based waterproofing application, it is a mechanically high resistant and thin as being covered easily with less material and smooth mesh. FileTex 60 Standard

Reinforcement Mesh has mesh size of 2.8 x 2.8 mm and unit weight of 60 g/sqm, and has high and real alkali resistance.